-
- Cuff / Thumb: LITECOREâ„¢ – Lightweight injection-molded one-piece cuff design.
- Break Angle: New 591 – Based off the reliable 590 angle and shape, but redesigned for enhanced closure, feel and responsiveness.
- Palm Stiffness: Game-Ready Fit + D3O® Protection – Easy break-in with added high impact protection.
- Strapping: Cross Form Strap – Secures the back of the hand via multiple attachment points for greater responsiveness while allowing for greater wrist mobility.
- Finger Area: Form Fit – Designed for customized feel and optimal responsiveness.
- Cuff: FLEXMOTION 2 – Strategic flex points and layered protection for greater range of motion.
- Pocket: Double Straight Tee – Better puck absorption and tracking.
- Backhand Guard: Molded Flexmotion 2 Backhand – Strategic tri-fl ex design and high impact protection.
- Palm and Liner: Dura Palm with Polygiene & Odor Crunch – Featuring Ax Suede with Suregrip for enhanced feel, comfort and responsiveness, with added odor management.
-
- PALM POSITION: Centered palm position. Balanced Feel.
- PALM: Reinforced Nash. Feel and durability.
- SIDE WALL PROTECTION: Stiff sidewall with curved finger protection. Impact protection.
- FINGER PROTECTIONS: High-density foam wrap. Impact protection.
- BLOCKING BOARD: Laminated dual-density foam with PE. Increased rebound direction and control off the blocker face.
- CUFF: 3-Piece adjustable cuff for freedom of movement.
-
- Firm front surface gives more active rebound
- Quick-slide material on inner pad edge
- Bottom trim with quick slide material
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Wider inner knee landing surface
- Three knee roll design
- Inner core with rebound active design
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
- Flat profile instep for quicker pad rotation
-
- Made domestically in the USA
- Firm internal core with HD side rails for greater pad stability
- Quick-slide material on inner pad edge
- Easy flex lower scoop design
- Integrated knee landing pad attached to inner core for immediate pad response
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh-rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center for quick pad rotation and control
- Wider inner knee landing surface
- Three knee roll design with flat knee rolls
- Inner foam core with carbon surface reinforcement
- Pad shape maximizes full width top to bottom full 11″ width
- Outer knee cradle pad is adjustable or removable
- Reinforced instep with flat profile to facilitate skate movement during pad rotation
-
- New V10 graphics for distinctive look and appeal
- Reinforced front board for more precise puck deflection
- Deep board top bend for puck deflection
- Molded inner core foam board with thick HD Foam for added rigidity
- Back hand cushion pad for comfort and protection
- Palm with index and small finger trigger design provides more comfort and grip
- Mesh palm gussets for ventilation
- High hand position creates added net coverage
- Finger protectors with HD foam protection
- Side index finger double layered protection
- Large solid side shield
- Palm design for dexterity and stick control
- Tapered bottom edge for a tight seal when down to the ice surface
- Floating cuff design increases wrist movement
-
- New V10 style and performance
- Deep board top bend for puck deflection
- Palm with index trigger design
- Side finger protector
- Large index side finger protection
- Palm design for improved fit and comfort
- High-density foam for increased protection and performance
- Side shield with HD foam for stability
- Floating cuff design increases wrist movement
- Side index floating pad
-
- Domestically built in the USA
- Pure Carbon reinforced front board for more precise puck deflection
- Deep board top bend for puck deflection
- Molded inner core foam board with 17MM thick HD for added rigidity
- Back hand cushion pad for comfort and protection
- Palm with index and small finger trigger design provides more comfort and grip
- Mesh palm gussets for ventilation
- Higher hand position creates added net coverage
- Finger protectors with HD foam protection and Carbon reinforcement
- Side index finger double layered protection
- Large solid side shield with carbon reinforcement
- Palm design for dexterity and stick control
- Carbon molded thumb insert
- Carbon insert on side shield for impact resistance
- Tapered bottom edge for tighter seal when down to the ice surface
- Floating cuff design increases wrist movement
-
- New V10 graphics for distinctive look and appeal
- Reinforced front board for more precise puck deflection
- Deep board top bend for puck deflection
- Molded inner core foam board with thick HD Foam for added rigidity
- Back hand cushion pad for comfort and protection
- Palm with index and small finger trigger design provides more comfort and grip
- Mesh palm gussets for ventilation
- High hand position creates added net coverage
- Finger protectors with HD foam protection
- Side index finger double layered protection
- Large solid side shield
- Palm design for dexterity and stick control
- Tapered bottom edge for tighter seal when down to the ice surface
- Floating cuff design increases wrist movement
-
- Curved flare at top blocking board
- Side shield for added coverage and protection
- Contoured cuff for increased wrist movement
- Side index finger pad
- Full finger protection
- Tapered top and bottom board edges
- Palm position optimized for picking stick up off ice
- Molded thumb protector
- Colors: White/Black only
-
- SIDE WALL PROTECTION: X-Stiff Sidewall with Straight Finger Protection. High impact protection
- CUFF: Adjustable FlexMotion Cuff. Amplified mobility with customizable fit and range of motion.
- FINGER PROTECTORS: HD Foam Wrap + D3O® Protection. Optimal impact protection
- PALM: Multi-Layered Reinforced Nash®. Optimized feel and durability
- PALM POSITION: Centered Palm Position. Provides balance
- BLOCKING BOARD: Heat-Laminated Dual-Density Foam with PE Board. Thin profile design with maximum rebound control.
-
- BREAK ANGLE: 600. Middle of hand closure
- PALM STIFFNESS: Game-Ready Fit + D3O® Protection. Easy break-in with upgraded protection
- CUFF/THUMB: One Piece. Redesigned cuff core for maximum coverage and enhanced closure.
- BACKHAND AND CUFF: FlexMotion Design. Segmented Molded HD foam protection for optimal flexibility, and articulated cuff for added mobility.
- BACKHAND PROTECTION: HD Raised-Foam Finger Padding. Enhanced flexibility and strong impact protection.
- POCKET: Double Straight Tee. Helps track the puck
- WRIST STRAP: Quick-Release Webbing Strap. Easy and secure adjustment
- INNER PALM: Layered Felt/D3O®. Game-ready flex with excellent impact protection
- FINGER STALLS: Nash®. Comfort feel and quicker release
-
- All new design and shape to maximize net coverage
- New wide span T-web design
- One-piece cuff and thumb
- Easy close design with deep pocket area
- Molded palm and front thumb insert
- Deeper back thumb profile for added hand comfort
- Double layer reinforced finger perimeter edge
- HD foam in back pad over fingers
- Finger tip deflecting rail with HD foams
- Reinforced T-top for greater web stability
- Inner hand strap for retention and control
- Cuff with no binding maximizes blocking surface
- 43″ perimeter size
- 60° angle palm break with easy flex
- Mesh finger stalls for comfort and heat dispersal
- Added padding in wrist strap for increased comfort
- Heat moldable for precise fit
- Defined break points for easy closing