FEATURED PRODUCTS
-
- Why would kids weighing 40-100 lbs use a Junior Stick (50 Flex) and then cut 4-8 Inches off making it even stiffer? That’s more like a 60-70-80 flex stick? That doesn’t make sense at all.
- Raven sticks are Designed & Built specifically for kids. Kids deserve to have the same Flex & Feel that the pros get, and that’s why your kids should use the Raven
- FLEX available- 20/30/40/50
- Flex Calculator: http://www.ravenhockey.com/rule-of-flex/
-
- High-Kick point with a soft mid-section creating longer loading periods to store maximize energy
- Skeleton+ Technology in the taper for better reliability
- Nanolite carbon layering throughout the shaft creating a light but durable stick
- T-Shape shaft geometry for traditional feel
- Accufeel blade giving the right blend of stiffness and feel
- Sigmatex material for increased structural strength
-
- High-Kick point with a soft mid-section creating longer loading periods to store maximize energy
- Skeleton+ Technology in the taper for better reliability
- Nanolite carbon layering throughout the shaft creating a light but durable stick
- T-Shape shaft geometry for traditional feel
- Accufeel blade giving the right blend of stiffness and feel
- Sigmatex material for increased structural strength
-
- CONTOURED SUPERFEET SHAPE: Stabilizes feet, minimizing friction, blisters and hot spots
- DURABLE CONSTRUCTION: Superfeet insoles keep their shape, delivering reliable support and comfort for up to 12 months or 200 hours of ice time, whichever comes first
- VENTING SYSTEM: The vent holes line up with the perforations in most hockey skates improve air circulation and breathability
- MOISTUREWICK: With long-lasting odor control
- EVOLYTE CARBON FIBER STABILIZER CAP: Responds to compression, springing back to its original shape
- THIN, HEEL-TO-TOE PROFILE: Designed specifically for skates, the elevated heel increases the surface area in contact between your foot and the skate midsole
- FLYBRIDGE™: Loads and channels energy and absorbs vibration for quick starts, crisp stops & tighter turns
-
- Material: Catchlite Palm, T-Trap & Backhand
- Cuff: CURV Reinforced Cuff + Perimeter
- Palm Protection: CURV Reinforced Rebound Control Foam + Poron
- Pocket: Double-T w/ Skate Lace
- Backcover Cuff: Square Free-Flex
- Palm Liner: Catchgrip+
- Wrist Strap: Range of Motion (R.O.M.) Strap
- Thumb: Neoprene Leverage Strap for Full Opening
- Weight: 2.45 lbs
-
- Cuff / Thumb: LITECORE™ – Lightweight injection-molded one-piece cuff design.
- Break Angle: New 591 – Based off the reliable 590 angle and shape, but redesigned for enhanced closure, feel and responsiveness.
- Palm Stiffness: Game-Ready Fit + D3O® Protection – Easy break-in with added high impact protection.
- Strapping: Cross Form Strap – Secures the back of the hand via multiple attachment points for greater responsiveness while allowing for greater wrist mobility.
- Finger Area: Form Fit – Designed for customized feel and optimal responsiveness.
- Cuff: FLEXMOTION 2 – Strategic flex points and layered protection for greater range of motion.
- Pocket: Double Straight Tee – Better puck absorption and tracking.
- Backhand Guard: Molded Flexmotion 2 Backhand – Strategic tri-fl ex design and high impact protection.
- Palm and Liner: Dura Palm with Polygiene & Odor Crunch – Featuring Ax Suede with Suregrip for enhanced feel, comfort and responsiveness, with added odor management.
-
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Lower skate strap with Elastic and Velcro closure
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- New inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Knee cradle center with MSH speeds pad and leg rotation
- Wider inner knee landing surface
- Three knee roll design
- Inner core is more rebound active for 2020
- Pad shape maximizes full width top to bottom full 11” width
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
-
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Lower skate strap with Elastic and Velcro closure
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center with MSH speeds pad and leg rotation
- Wider inner knee landing surface
- Pad sizing on back thigh rise
- Three knee roll design
- Inner foam core features the new Pure Carbon
- Inner core is more rebound active for 2020
- Pad shape maximizes full width top to bottom full 11” width
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
-
- Easy flex design specifically for smaller age group
- New easy strap system with quick Velcro attachment on leg and knee areas
- Cushion padding on inside landing areas of knee and calf
- Pre-shaped for easy break-in
- Full outer knee and calf protection
- Pads marked left and right
- Full pro look with new V9 graphics
- Lower skate control leather strap
- Double layer inner knee cradle padding
- Split top outside roll provides added flexibility
- Built in pad curve helps close off the five-hole area
- Pad width 9 inches
- Colors: White/Black only
PreviousNext
ON SALE
-
- Construction: Lightweight Polyester
- Fingers/Backhand: PE Foam and PE Insert
- Thumb: Regular Thumb
- Palm: Nash Palm with Reinforcements
- Cuff: Open Cuff
-
- Mid-kick point design for a quick release
- Sabre Taper for a combination of power and accuracy
- True 1 Phantom Feel for a lightweight construction
- Minimus Carbon 400 for good shaft strength
- Fuelcore technology for added pop
- Ergo shaft shape for an enhanced feel
- Apex Grip for increased control
-
- Brand- Bauer Supreme
- Peformance Materials- S170 with upgrades
- Flex Point- Bauer Supreme 1S
- Grip- Tac Spiral Grip Shaft
- Shaft- Basket Weave Carbon Fiber
- Blade Construction: Bimax
- Warranty 30 days
-
- Weight: 380 grams
- Length: 61 inches
- Construction Material: Blackline 18K Carbon Fiber
- Kick Point Position: Low Inflection point where maximum stored energy is released.
- Shaft Design: Double straight sidewalls Shape of the shaft edge.
- Blade Construction: VRF.2 Technology
- Tapered: DropKick Taper Shaft width gets thinner towards the blade
-
- WEIGHT 435G (SENIOR)
- LENGTH SR: 60”
- INT: 57”,48”
- JR: 44”,40”
- VARIABLE MID KICKPOINT
- WIDER HOSEL
- SQUARE SHAFT
- TEXTURE GRIP
-
- WEIGHT 435G (SENIOR)
- LENGTH SR: 60”
- INT: 57”,48”
- JR: 44”,40”
- VARIABLE MID KICKPOINT
- WIDER HOSEL
- SQUARE SHAFT
- TEXTURE GRIP
-
- Molded HD foam
- Split thigh pads
- High-density foam padding with poly inserts
- Abrasion-resistant hip and leg overlays
- Padded belt
- Skate Lace closures
- Molded dome hip guard
- Segmented kidney pads
- Segmented hip flex zones
- Dynamic flex zones
- Ventilated back panels
- Stretch leg gussets with zippers
- THERMO MAX liner
- Removable thigh guard for logo embroidery
-
- KICK POINT: MAX LOADING MID KICK: A soft mid-section allows for a longer loading period to store more energy, while the stiff taper zone maximizes stability and response.
- BLADE: ACU4 XX-STIFF BLADE: CCM’s stiffest blade with lightweight construction features a tactile surface for maximum feel and shot control plus a reinforced toe and heel for unmatched durability.
- SHAFT TECHNOLOGY: X-FLOW TECHNOLOGY: An advanced molding technology that eliminates excess resin and voids for improved shaft quality, consistency and durability while reducing overall stick weight.
- MATERIAL: SIGMATEX: Developed by a world leader in aerospace technology specifically for CCM, this high-performance spread tow fabric features an innovative weaving process that provides lightweight strength and resilience.
-
UPGRADES:
- BOOT: RocketFrame Composite (NHL Caliber boot)
- CORE: SpeedCore 2
- COMFORT PADS: Featured on the FT1
- OUTSOLE: Composite with Exhaust
- TONGUE: Tri-tech 7mm White Felt Tongue (Featured on FT1)
- LINER: Total Dri with Abrasion Resistant Zones
- TOP EYELETS: Brass (Featured on FT1)
- RUNNER: SpeedBlade Stainless +2mm
PreviousNext
Latest News
May
28
Jan
18
CCM Trigger 6 Pro Hockey Stickposted by Sports ETC