FEATURED PRODUCTS
-
- TOVI/Raven Partnered Design
- Patented DiamondAire Blade
- 100% Solid Carbon Fiber
- Aerodynamic CrossBeam Construction
- Micro-Grip Blade Texture
- DiamondCoat Liquid Tape
- Tactile Grip
- 90 Day Warranty
-
- CONTOURED SUPERFEET SHAPE: Stabilizes feet, minimizing friction, blisters and hot spots
- DURABLE CONSTRUCTION: Superfeet insoles keep their shape, delivering reliable support and comfort for up to 12 months or 200 hours of ice time, whichever comes first
- VENTING SYSTEM: The vent holes line up with the perforations in most hockey skates improve air circulation and breathability
- MOISTUREWICK: With long-lasting odor control
- EVOLYTE CARBON FIBER STABILIZER CAP: Responds to compression, springing back to its original shape
- THIN, HEEL-TO-TOE PROFILE: Designed specifically for skates, the elevated heel increases the surface area in contact between your foot and the skate midsole
- FLYBRIDGE™: Loads and channels energy and absorbs vibration for quick starts, crisp stops & tighter turns
-
- Cuff / Thumb: LITECORE™ – Lightweight injection-molded one-piece cuff design.
- Break Angle: New 591 – Based off the reliable 590 angle and shape, but redesigned for enhanced closure, feel and responsiveness.
- Palm Stiffness: Game-Ready Fit + D3O® Protection – Easy break-in with added high impact protection.
- Strapping: Cross Form Strap – Secures the back of the hand via multiple attachment points for greater responsiveness while allowing for greater wrist mobility.
- Finger Area: Form Fit – Designed for customized feel and optimal responsiveness.
- Cuff: FLEXMOTION 2 – Strategic flex points and layered protection for greater range of motion.
- Pocket: Double Straight Tee – Better puck absorption and tracking.
- Backhand Guard: Molded Flexmotion 2 Backhand – Strategic tri-fl ex design and high impact protection.
- Palm and Liner: Dura Palm with Polygiene & Odor Crunch – Featuring Ax Suede with Suregrip for enhanced feel, comfort and responsiveness, with added odor management.
-
- Easy flex design specifically for smaller age group
- Easy strap system with quick Velcro® attachment on leg and knee areas
- Cushion padding on inside landing areas of knee and calf
- Pre-shaped for easy break-in
- Full outer knee and calf protection
- Pads marked left and right
- Full pro look with V10 graphics
- Lower skate control Velcro® and elastic strap
- Double layer inner knee cradle padding
- Split top outside roll provides added flexibility
- Built in pad curve helps close off the five-hole area
- Pad width 9″
- Colors: White/Black only
-
- Firm front surface gives more active rebound
- Quick-slide material on inner pad edge
- Bottom trim with quick slide material
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Wider inner knee landing surface
- Three knee roll design
- Inner core with rebound active design
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
- Flat profile instep for quicker pad rotation
-
- Firm internal core with HD side rails for greater pad stability
- Quick-slide material on inner pad edge
- Easy flex lower scoop design
- Bottom trim with quick slide material
- Integrated knee landing pad attached to inner core for immediate pad response
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center for quick pad rotation and control
- Wide inner knee landing surface
- Three knee roll design with flat knee rolls
- Pad shape maximizes full width top to bottom full 11″ width
- Outer knee cradle pad is adjustable or removable
- Reinforced instep with flat profile to facilitate skate movement during pad rotation
-
- Firm internal core with HD side rails for greater pad stability
- Quick-slide material on inner pad edge
- Easy flex lower scoop design
- Bottom trim with quick slide material
- Integrated knee landing pad attached to inner core for immediate pad response
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center for quick
pad rotation and control - Wide inner knee landing surface
- Three knee roll design with flat knee rolls
- Pad shape maximizes full width top to bottom full 11″ width
- Outer knee cradle pad is adjustable or removable
- Reinforced instep with flat profile to facilitate skate movement during pad rotation
-
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Lower skate strap with Elastic and Velcro closure
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- New inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Knee cradle center with MSH speeds pad and leg rotation
- Wider inner knee landing surface
- Three knee roll design
- Inner core is more rebound active for 2020
- Pad shape maximizes full width top to bottom full 11” width
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
-
- Made domestically in the USA
- Firm internal core with HD side rails for greater pad stability
- Quick-slide material on inner pad edge
- Easy flex lower scoop design
- Integrated knee landing pad attached to inner core for immediate pad response
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh-rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center for quick pad rotation and control
- Wider inner knee landing surface
- Three knee roll design with flat knee rolls
- Inner foam core with carbon surface reinforcement
- Pad shape maximizes full width top to bottom full 11″ width
- Outer knee cradle pad is adjustable or removable
- Reinforced instep with flat profile to facilitate skate movement during pad rotation
PreviousNext
ON SALE
-
- Molded PE shoulder caps
- Single layer construction with PE foam
- PE foam base in the torso
- Adjustable and removeable belly and lower back pads
- Anatomical molded sternum and PE inserts for spine protection
- Sublimated liner with soft front stretch panels
-
- Anatomical design
- Length adjustable forearm strap
- JDP elbow cap and molded EVA foam cover
- Floating bicep with reinforced bicep guard
- Two-piece flex motion construction
-
- Anatomical shield design for a better overall fit
- Internal and external belt for a snug fit
- Floating spine protector with D30 material in the tailbone
- PE plastic cap on the thigh with PE foam
- Pro cut premium 200D Nylon shell with reinforcement
-
- JDP Cap with Reinforced PE Foam
- Molded PE Caps
- Fixed Molded Spine Protector
- 400D Lightweight Nylon and Polyester Panels
-
- Construction: Anatomical fit recreational level pants with an updated shell and padded belt to match the AS 580 look and fit.
- Adjustment: Hockey lace and external belt system with 1” length adjustment zipper.
- Shell: Premium 400D Nylon front. Side and rear panels plus an inner leg zipper.
- Hip/Kidney: JDP Cap reinforced with PE foam, molded PE cap and sublimated comfort liner.
- Back Protection: Compression-molded EVA foam spine protection. The interior tailpad look and colours are like the AS-V.
- Thigh Guard: JDP cap reinforced with PE foam.
-
- CONSTRUCTION: Lightweight Polyester
- LINER: Liner with PU cushion foam for a soft feel.
- FINGERS/BACKHAND: PE foam with PE inserts on the back of the hand. Offers a lightweight construction with a great level of protection.
- THUMB: Regular PE foam to protect the thumb.
- PALM: Soft Nash Palm with reinforcement for a great soft feel and durability.
-
- Skill Level: Competitive
- Fit Profile: Power Fit
- Foam/Materials: HD, HD2, EVA
-
- Upgrades: Sublimated liner, Cover belt,
- Adjustability: Skate lace closure
- Belt: Wrap around belt with quick cinch buckle
- Liner: THERMOMAX sub liner
- Spine: Integrated spine with vent armor foam
- Hip: Classic fit one-piece hip guard
- Kidney: One-piece with molded PE and MD foam
- Thigh Protector: Molded PE and MD foam
- Shell: Heavy Duty 420D Nylon with overlay and stretch zone
-
- Construction: Anatomical fit recreational level pants with an updated shell and padded belt to match the AS 580 look and fit.
- Adjustment: Hockey lace and external belt system with 1” length adjustment zipper.
- Shell: Premium 400D Nylon front. Side and rear panels plus an inner leg zipper.
- Hip/Kidney: JDP Cap reinforced with PE foam, molded PE cap and sublimated comfort liner.
- Back Protection: Compression-molded EVA foam spine protection. The interior tailpad look and colours are like the AS-V.
- Thigh Guard: JDP cap reinforced with PE foam.
PreviousNext
Latest News
Feb
10
TRUE Catalyst PX3 Goalie Gearposted by Sports ETC
Oct
04
Oct
04
Brian’s Optik 3 Available Now!posted by Sports ETC