FEATURED PRODUCTS
-
Details
- Why would kids weighing 40-100 lbs use a Junior Stick (50 Flex) and then cut 4-8 Inches off making it even stiffer? That’s more like a 60-70-80 flex stick? That doesn’t make sense at all.
- Raven sticks are Designed & Built specifically for kids. Kids deserve to have the same Flex & Feel that the pros get, and that’s why your kids should use the Raven
- FLEX available- 20/30/40/50
- Flex Calculator: http://www.ravenhockey.com/rule-of-flex/
-
Details
- High-Kick point with a soft mid-section creating longer loading periods to store maximize energy
- Skeleton+ Technology in the taper for better reliability
- Nanolite carbon layering throughout the shaft creating a light but durable stick
- T-Shape shaft geometry for traditional feel
- Accufeel blade giving the right blend of stiffness and feel
- Sigmatex material for increased structural strength
-
Details
- High-Kick point with a soft mid-section creating longer loading periods to store maximize energy
- Skeleton+ Technology in the taper for better reliability
- Nanolite carbon layering throughout the shaft creating a light but durable stick
- T-Shape shaft geometry for traditional feel
- Accufeel blade giving the right blend of stiffness and feel
- Sigmatex material for increased structural strength
-
Details
*NOTE- Sizing is based off of hockey skate size*
DEEP HEEL CUP: Features the widest and deepest heel cup that offers maximum support and positions the soft tissue to help with natural shock absorption.
MOISTUREWICK™ WITH ODOR CONTROL: Top layer delivers long lasting odor control.
EVOLYTE™ CARBON FIBER-BLEND STABILIZER CAP FOR WEIGHT-DEFYING SUPPORT
HEEL-TO-TOE PROFILE: The elevated heel increases the surface area in contact between your foot and the midsole.
VENTING SYSTEM: The vent holes line up with the perforations in most hockey skates improve air circulation and breathability.
FLYBRIDGE™: Loads and channels energy and absorbs vibration for quick starts, crisp stops & tighter turns.
AEROLYTE™ FOAM: Specifically blended for performance – delivers more cush in a thinner, lighter foam
-
Details
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Lower skate strap with Elastic and Velcro closure
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- New inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Knee cradle center with MSH speeds pad and leg rotation
- Wider inner knee landing surface
- Three knee roll design
- Inner core is more rebound active for 2020
- Pad shape maximizes full width top to bottom full 11” width
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
-
Details
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Lower skate strap with Elastic and Velcro closure
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center with MSH speeds pad and leg rotation
- Wider inner knee landing surface
- Pad sizing on back thigh rise
- Three knee roll design
- Inner foam core features the new Pure Carbon
- Inner core is more rebound active for 2020
- Pad shape maximizes full width top to bottom full 11” width
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
-
Details
- Easy flex design specifically for smaller age group
- New easy strap system with quick Velcro attachment on leg and knee areas
- Cushion padding on inside landing areas of knee and calf
- Pre-shaped for easy break-in
- Full outer knee and calf protection
- Pads marked left and right
- Full pro look with new V9 graphics
- Lower skate control leather strap
- Double layer inner knee cradle padding
- Split top outside roll provides added flexibility
- Built in pad curve helps close off the five-hole area
- Pad width 9 inches
- Colors: White/Black only
-
Details
- All new design for 2020
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- New inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Wider inner knee landing surface
- Three knee roll design
- Inner core is more rebound active for 2020
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
-
Details
- Firmer front surface gives more active rebound
- Quick slide material on inner pad edge
- Bottom trim with quick slide material
- Lower skate strap with Elastic and Velcro closure
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2” thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- New inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Knee cradle center with MSH speeds pad and leg rotation
- Wider inner knee landing surface
- Three knee roll design
- Inner core is more rebound active for 2020
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
Reinforced instep over skate
PreviousNext
ON SALE
-
Details
- Mid-kick point design for a quick release
- Sabre Taper for a combination of power and accuracy
- True 1 Phantom Feel for a lightweight construction
- Minimus Carbon 400 for good shaft strength
- Fuelcore technology for added pop
- Ergo shaft shape for an enhanced feel
- Apex Grip for increased control
-
Details
- Brand- Bauer Supreme
- Peformance Materials- S170 with upgrades
- Flex Point- Bauer Supreme 1S
- Grip- Tac Spiral Grip Shaft
- Shaft- Basket Weave Carbon Fiber
- Blade Construction: Bimax
- Warranty 30 days
-
Details
- Weight: 380 grams
- Length: 61 inches
- Construction Material: Blackline 18K Carbon Fiber
- Kick Point Position: Low Inflection point where maximum stored energy is released.
- Shaft Design: Double straight sidewalls Shape of the shaft edge.
- Blade Construction: VRF.2 Technology
- Tapered: DropKick Taper Shaft width gets thinner towards the blade
-
Details
- WEIGHT 435G (SENIOR)
- LENGTH SR: 60”
- INT: 57”,48”
- JR: 44”,40”
- VARIABLE MID KICKPOINT
- WIDER HOSEL
- SQUARE SHAFT
- TEXTURE GRIP
-
Details
- WEIGHT 435G (SENIOR)
- LENGTH SR: 60”
- INT: 57”,48”
- JR: 44”,40”
- VARIABLE MID KICKPOINT
- WIDER HOSEL
- SQUARE SHAFT
- TEXTURE GRIP
-
Details
- Molded HD foam
- Split thigh pads
- High-density foam padding with poly inserts
- Abrasion-resistant hip and leg overlays
- Padded belt
- Skate Lace closures
- Molded dome hip guard
- Segmented kidney pads
- Segmented hip flex zones
- Dynamic flex zones
- Ventilated back panels
- Stretch leg gussets with zippers
- THERMO MAX liner
- Removable thigh guard for logo embroidery
-
Details
- KICK POINT: MAX LOADING MID KICK: A soft mid-section allows for a longer loading period to store more energy, while the stiff taper zone maximizes stability and response.
- BLADE: ACU4 XX-STIFF BLADE: CCM’s stiffest blade with lightweight construction features a tactile surface for maximum feel and shot control plus a reinforced toe and heel for unmatched durability.
- SHAFT TECHNOLOGY: X-FLOW TECHNOLOGY: An advanced molding technology that eliminates excess resin and voids for improved shaft quality, consistency and durability while reducing overall stick weight.
- MATERIAL: SIGMATEX: Developed by a world leader in aerospace technology specifically for CCM, this high-performance spread tow fabric features an innovative weaving process that provides lightweight strength and resilience.
-
Details
UPGRADES:
- BOOT: RocketFrame Composite (NHL Caliber boot)
- CORE: SpeedCore 2
- COMFORT PADS: Featured on the FT1
- OUTSOLE: Composite with Exhaust
- TONGUE: Tri-tech 7mm White Felt Tongue (Featured on FT1)
- LINER: Total Dri with Abrasion Resistant Zones
- TOP EYELETS: Brass (Featured on FT1)
- RUNNER: SpeedBlade Stainless +2mm
-
Details
- Pro 4000 Nylon with Side Panel Reinforcement
- Adjustable Thigh Guard
- JDP Cap
- Molded PE Thigh
- Molded PE Foam Spine
PreviousNext
Location: 
Phone: 
Email: info@sportsetc.net